Layout of Mirai Controller Box:
a. Power supply (DC19V/120W, included)
b. Ethernet port to robot LAN
c. Ethernet port to WAN/internet
d. 2x USB3 type A port – rear (cameras, 3D mouse, other sensors)
e. 1x USB3 type A port - front (cameras, 3D mouse, other sensors)
f. 2x Wi-Fi antenna connectors (antennas included)
g. HDMI connector (deactivated)
h. Optical interface (deactivated)
i. RS232 serial port (DB9 male, deactivated)
Hardware Specs:
- NVIDIA Embedded Pascal Q1 with 4GB GDDR5
- Gen 7th Intel Core i5-7300U Dual-core processor
- 8GB DDR4L-2133
- 2.5” SATA-III SSD (240GB – 1TB, depending on the model)
- Dual band Wi-Fi, IEEE 802.11ac/a/b/g/n Wi-Fi
- Dimension: 210mm x 177mm x 45mm
- DC +19V. Maximum Power Consumption: ~90W
- Operating: 0 – +40 degrees C. Humidity 20% – 95% non-condensing
- Certifications: CE, FCC, RoHS
Comments
0 comments
Article is closed for comments.