It is important to use a tablet wich runs Android 10.0!
No connection to the MIRAI controller via Table. Is it possible to connect via cable?
Equipment:
1. Samsung Galaxy Tab A7 with Android 10
2. Anker USB 3.0 Data and Ethernet Hub for USB-C devices
3. Ethernet cable
Procedure:
1. Connect the USB-C connector to the tablet and the Ethernet cable to the port and Ethernet switch.
2. Go to the network configuration of your tablet and set the static IP address to an address that is within the range of your robot controller's network (e.g. 192.168.100.150).
3. Press the button to connect to the Ethernet network.
4. Go to the MIRAI Training App --> Network Configuration --> Robot network settings (Wi-Fi) and change it to the MIRAI Controller IP (e.g. http://192.168.100.5:6543/). If this setting is not visible, tap the blank area below the proxy setting 4 times. The settings screen should now be visible.
5. The settings screen should now be visible. After changing to your preferred IP please save it.
Comments
0 comments
Article is closed for comments.